D7net
Home
Console
Upload
information
Create File
Create Folder
About
Tools
:
/
lib
/
modules
/
4.4.0-1128-aws
/
build
/
include
/
linux
/
ulpi
/
Filename :
regs.h
back
Copy
#ifndef __LINUX_ULPI_REGS_H #define __LINUX_ULPI_REGS_H /* * Macros for Set and Clear * See ULPI 1.1 specification to find the registers with Set and Clear offsets */ #define ULPI_SET(a) (a + 1) #define ULPI_CLR(a) (a + 2) /* * Register Map */ #define ULPI_VENDOR_ID_LOW 0x00 #define ULPI_VENDOR_ID_HIGH 0x01 #define ULPI_PRODUCT_ID_LOW 0x02 #define ULPI_PRODUCT_ID_HIGH 0x03 #define ULPI_FUNC_CTRL 0x04 #define ULPI_IFC_CTRL 0x07 #define ULPI_OTG_CTRL 0x0a #define ULPI_USB_INT_EN_RISE 0x0d #define ULPI_USB_INT_EN_FALL 0x10 #define ULPI_USB_INT_STS 0x13 #define ULPI_USB_INT_LATCH 0x14 #define ULPI_DEBUG 0x15 #define ULPI_SCRATCH 0x16 /* Optional Carkit Registers */ #define ULPI_CARKIT_CTRL 0x19 #define ULPI_CARKIT_INT_DELAY 0x1c #define ULPI_CARKIT_INT_EN 0x1d #define ULPI_CARKIT_INT_STS 0x20 #define ULPI_CARKIT_INT_LATCH 0x21 #define ULPI_CARKIT_PLS_CTRL 0x22 /* Other Optional Registers */ #define ULPI_TX_POS_WIDTH 0x25 #define ULPI_TX_NEG_WIDTH 0x26 #define ULPI_POLARITY_RECOVERY 0x27 /* Access Extended Register Set */ #define ULPI_ACCESS_EXTENDED 0x2f /* Vendor Specific */ #define ULPI_VENDOR_SPECIFIC 0x30 /* Extended Registers */ #define ULPI_EXT_VENDOR_SPECIFIC 0x80 /* * Register Bits */ /* Function Control */ #define ULPI_FUNC_CTRL_XCVRSEL BIT(0) #define ULPI_FUNC_CTRL_XCVRSEL_MASK 0x3 #define ULPI_FUNC_CTRL_HIGH_SPEED 0x0 #define ULPI_FUNC_CTRL_FULL_SPEED 0x1 #define ULPI_FUNC_CTRL_LOW_SPEED 0x2 #define ULPI_FUNC_CTRL_FS4LS 0x3 #define ULPI_FUNC_CTRL_TERMSELECT BIT(2) #define ULPI_FUNC_CTRL_OPMODE BIT(3) #define ULPI_FUNC_CTRL_OPMODE_MASK (0x3 << 3) #define ULPI_FUNC_CTRL_OPMODE_NORMAL (0x0 << 3) #define ULPI_FUNC_CTRL_OPMODE_NONDRIVING (0x1 << 3) #define ULPI_FUNC_CTRL_OPMODE_DISABLE_NRZI (0x2 << 3) #define ULPI_FUNC_CTRL_OPMODE_NOSYNC_NOEOP (0x3 << 3) #define ULPI_FUNC_CTRL_RESET BIT(5) #define ULPI_FUNC_CTRL_SUSPENDM BIT(6) /* Interface Control */ #define ULPI_IFC_CTRL_6_PIN_SERIAL_MODE BIT(0) #define ULPI_IFC_CTRL_3_PIN_SERIAL_MODE BIT(1) #define ULPI_IFC_CTRL_CARKITMODE BIT(2) #define ULPI_IFC_CTRL_CLOCKSUSPENDM BIT(3) #define ULPI_IFC_CTRL_AUTORESUME BIT(4) #define ULPI_IFC_CTRL_EXTERNAL_VBUS BIT(5) #define ULPI_IFC_CTRL_PASSTHRU BIT(6) #define ULPI_IFC_CTRL_PROTECT_IFC_DISABLE BIT(7) /* OTG Control */ #define ULPI_OTG_CTRL_ID_PULLUP BIT(0) #define ULPI_OTG_CTRL_DP_PULLDOWN BIT(1) #define ULPI_OTG_CTRL_DM_PULLDOWN BIT(2) #define ULPI_OTG_CTRL_DISCHRGVBUS BIT(3) #define ULPI_OTG_CTRL_CHRGVBUS BIT(4) #define ULPI_OTG_CTRL_DRVVBUS BIT(5) #define ULPI_OTG_CTRL_DRVVBUS_EXT BIT(6) #define ULPI_OTG_CTRL_EXTVBUSIND BIT(7) /* USB Interrupt Enable Rising, * USB Interrupt Enable Falling, * USB Interrupt Status and * USB Interrupt Latch */ #define ULPI_INT_HOST_DISCONNECT BIT(0) #define ULPI_INT_VBUS_VALID BIT(1) #define ULPI_INT_SESS_VALID BIT(2) #define ULPI_INT_SESS_END BIT(3) #define ULPI_INT_IDGRD BIT(4) /* Debug */ #define ULPI_DEBUG_LINESTATE0 BIT(0) #define ULPI_DEBUG_LINESTATE1 BIT(1) /* Carkit Control */ #define ULPI_CARKIT_CTRL_CARKITPWR BIT(0) #define ULPI_CARKIT_CTRL_IDGNDDRV BIT(1) #define ULPI_CARKIT_CTRL_TXDEN BIT(2) #define ULPI_CARKIT_CTRL_RXDEN BIT(3) #define ULPI_CARKIT_CTRL_SPKLEFTEN BIT(4) #define ULPI_CARKIT_CTRL_SPKRIGHTEN BIT(5) #define ULPI_CARKIT_CTRL_MICEN BIT(6) /* Carkit Interrupt Enable */ #define ULPI_CARKIT_INT_EN_IDFLOAT_RISE BIT(0) #define ULPI_CARKIT_INT_EN_IDFLOAT_FALL BIT(1) #define ULPI_CARKIT_INT_EN_CARINTDET BIT(2) #define ULPI_CARKIT_INT_EN_DP_RISE BIT(3) #define ULPI_CARKIT_INT_EN_DP_FALL BIT(4) /* Carkit Interrupt Status and * Carkit Interrupt Latch */ #define ULPI_CARKIT_INT_IDFLOAT BIT(0) #define ULPI_CARKIT_INT_CARINTDET BIT(1) #define ULPI_CARKIT_INT_DP BIT(2) /* Carkit Pulse Control*/ #define ULPI_CARKIT_PLS_CTRL_TXPLSEN BIT(0) #define ULPI_CARKIT_PLS_CTRL_RXPLSEN BIT(1) #define ULPI_CARKIT_PLS_CTRL_SPKRLEFT_BIASEN BIT(2) #define ULPI_CARKIT_PLS_CTRL_SPKRRIGHT_BIASEN BIT(3) #endif /* __LINUX_ULPI_REGS_H */